Can someone point me in the right direction for c500 trunk hinges?

[Shelby67air]

Can i buy them? Does someone make them?  I want to put together the back of my c500 but need the hinges.  Thanks

[charger chris]

There is a set on eBay.  He is a member here.

[Alaskan_TA]

Someone here has a thread on how to make them from F-body hinges.

[kevs1969daytona]

order these from daytonalo amazing quality.  Think 500 is the same as a Daytona 

[held1823]

i will have a nice reproduction set in hand sometime next week. $275

[Shelby67air]

Hello, took time off to rebuild Hemi motor for Roadrunner. Done hope everyone is doing well. Now want to focus on the charger 500. Now I'm ready to buy the trunk hinges. Where can I get them now?.

[A383Wing]

Hello, took time off to rebuild Hemi motor for Roadrunner. Done hope everyone is doing well. Now want to focus on the charger 500. Now I'm ready to buy the trunk hinges. Where can I get them now?.

scroll up and read the replies

[daytonalo]

I have made and sold over 50 sets , only have one set remaining just in case I decide to start another Daytona . I still have the tooling to make these

[KurtfromLaQuinta]

I have made and sold over 50 sets , only have one set remaining just in case I decide to start another Daytona . I still have the tooling to make these

Well that's good to know.
So are you going to do that?

[daytonalo]

With the price of steel what it is  have to get 325.set with the C-channel plus 20 shipping charge USA . Would need 10 orders to make it worth my time.
That said this Aero section has changed dramatically from when I joined in 06. Only few building cars  more gossip about the cars than building 

[gymratt30]

Id be willing to buy 2 sets from you larry.
Anyone else needing them??

[daytonalo]

Im going to post for maybe last time I make Daytona trunk hinges . Last batch was in 2018
With the price of steel what it is  have to get 325.set with the C-channel plus 20 shipping charge USA . Would need 10 orders to make it worth my time.

[6PakBee]

Im going to post for maybe last time I make Daytona trunk hinges . Last batch was in 2018
With the price of steel what it is  have to get 325.set with the C-channel plus 20 shipping charge USA . Would need 10 orders to make it worth my time.

In your classified you mention that you are using a lighter gauge material than original.  What was the original gauge and what gauge are you using?  Thanks in advance.

[DAY CLONA]

In your classified you mention that you are using a lighter gauge material than original.  What was the original gauge and what gauge are you using?  Thanks in advance.

Originals are approx .125 or 1/8" inch thick wall square tubing.....

[odcics2]

 
See for sale ad.