73 charger se What goes here!

[AmadeusCharger500]

Whatever it was is long lost to me. I have a sail panel and some various paper and cardboard looking things but nothing substantial enough to fill the gap behind the small windows.

[AmadeusCharger500]

These are the remains of what went in the general area of sail panel and above rear door panel.

[Nacho-RT74]

Everything of that plus the interior louvers frame...

[AmadeusCharger500]

I think what I have there is not all usable, and some pieces missing. Is any this available aftermarket? Also interior louvres?

[Nacho-RT74]

There are several interior louvers used on ebay right now. Not white thought, but one parchment.

The cardboard panel with the headliner material can be made.

The rest is just noise and temp isolation, can be made too. You get one of them in good conditions yet. Just make a template amd make a new one. Both sides are the same shape. Juts a cardboard piece full of tar on inner side.

I'm not an SE expert, but more less is just that.

On 3rd gen board there is a guy who took its isolation panel in allmost perfect conditions, made templates and sold them for something like $15 bucks. Hardtop uses the same panel. The body filler plug SEs got an extra piece of isolation made of the yellow fiberglass stuff ( like the kick panels )

I'm pretty sure on my reference pic collection I have some of this area.

[Nacho-RT74]

Parchment set I saw are exterior louvers. At this moment just black interiors listed. At least on a quick search

Editing: also a tan set ( maybe a faded white ), in separated auctions.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=Charger+73+SE+louvers&_sacat=0

about the isolation panel pic.... couldn't find an SE setup from my pics collection, but this gives you an idea for the carboard ( with Tar ) isolation

It seems to be a 73/74 Satelite, but the same for Chargers.

the area not covered by that panel, is filled with the foam on curve plus the  fiberglass one.

Foam goes here:

[AmadeusCharger500]

Wow that is everything, fantastic! You sir are the saint of Charger knowledge. I really appreciate this.

[Nacho-RT74]

I just collect pics which I consider nice for reference. I know have seen this same area pics for SEs.

The inner louver insert also holds the Sail interior panel with the headliner cloth in place.

[ODZKing]

Go to my website and look at the pics I took of the headliner going in. about 1/4 way down.
http://www.retrorarities.com/Resto2/index.html

[AmadeusCharger500]

Really great Photos Odz! thanks for sharing.

[Nacho-RT74]

I KNEW I had this pic somwhere. There is the white foam along with the cardboard piece. Just to accompish the pics gallery posted by ODZking

its a 74, hence the diff seatbelt setup shown there.

Sail panel with the headliner material goes held in place by the rear glass trim and the inner louvers