Schumacher engine mounts

[dojjan99]

Hi I have a 1968 Charger R / T with an Indy 540 alu block. Bought engine mounts from you when it was Hemin's attachment to the block. A question when accelerating, the motor lifts about 1 inch on the left side and it seems that the engine is about 1 inch too high. Have I done something wrong or is it normal? A little uncomfortable that the engine is moving afraid that something will break. Grateful for answer // Anders
Sent this to Mike at Shumacher no answer, hope you can help me.

[INTMD8]

I had to cut/weld those mounts in order for the engine to sit low enough in my car.

With the bushing setup it has, there should be very little noticeable movement.

[RallyeMike]

It should not move 1 inch. Put a bottle jack under the pan rail with a wood block and look for the movement.

.... I heard a rumor that Schumacher is in the process of being sold?