News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

RPM gage connection

Started by EricS, July 14, 2021, 11:14:15 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

EricS

July 14, 2021, 11:14:15 AM
On my 66 the RPM gage do not work. Where is it plugged?

Nacho-RT74

#1
July 14, 2021, 11:35:05 AM
Tipically - lead of coil from engine bay and Ign1 ( RUN circuit ) into the dash. Since the tach was a standard equipment on all first gen Chargers, should be part of the main harness.

I know 66s got some diff setup for the tach thought, something like a sender unit, but I'm not clear about it. Some 66 owner could know it way better than me.

http://www.dodgecharger.com/forum/index.php?topic=53466.0

https://premiumdashdecals.com/wp-content/uploads/2016/06/Installation_Instructions_64-66_Tach_Sender_Board.pdf

https://manualzz.com/doc/46930873/66-dodge-charger--and-others--tach-board---66
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

EricS

#2
July 14, 2021, 12:14:55 PM
How can I take the instrument off the dash?
Print
Go Up Pages1
User actions