Window Felts

[bandit70]

I bought some new window felts for my 70 Charger and the front outside pieces are about 1/4" short leaving a gap at the end for water to get in.  Thinking this has to be wrong, I go look at the other side of the car which has what I assume are the originals on still and it too has a 1/4" gap at the end right up by the window vent pillar.   Another Charger owner thought it was normal when I described it but it just does not look right to me.  Water will definitely get in there and I hate to rely on the drain holes in the door to be the remedy.

Can anyone verify if their setup has this gap at the end too?   I pic would be great.


The pic attached shows the gap.   The second arrow is showing another gap by the vent pillar but that is for another day so ignore.

[birdsandbees]

You're missing the short felt that the chrome strip slides up and down on. Solution posted on FBBO..

[armor64]

these little dudes pop in to seal that off, they are thinner than the felts to allow the thicker chrome edge to slide easier.

https://www.legendaryautointeriors.com/product/68-70-chrysler-b-body-door-window-weatherstrip-plugs/