News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need help..fender pentastar emblem measurements for '69 Charger

Started by T769RT, April 05, 2021, 08:38:01 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

T769RT

April 05, 2021, 08:38:01 PM
Hey guys, just got a call from my paint shop and they just realized they accidentally welded up the holes for my the pentastar emblem on the passenger fender of my '69 Charger.

Does anyone have an original '69 fender handy without the emblem mounted that they can take measurement/pics of the two holes for me?

Any help would be greatly appreciated.

Thanks!
1969 Dodge Charger R/T 440/4-Speed
1968 Dodge Superbee 383/727

green69rt

#1
April 05, 2021, 11:24:48 PM
Isn't the emblem on the driver side only?

T769RT

#2
April 06, 2021, 12:14:03 AM
It's the other way around...only on the passenger side, never on the driver side.
1969 Dodge Charger R/T 440/4-Speed
1968 Dodge Superbee 383/727

green69rt

#3
April 06, 2021, 08:40:20 AM
Figures, I would have done it wrong.

Mopar Nut

#5
April 07, 2021, 02:11:01 PM
 :popcrn: from thread.
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

AKcharger

#6
April 08, 2021, 09:58:32 AM
May I strongly suggest simply gluing it on as opposed to drilling 2 holes through you fender, remember you need hole for retainer AND alignment pin. It's extra work, potential corrosion start point and unnecessary IMO

will

#7
April 08, 2021, 10:21:41 AM
2 sided tape.
Print
Go Up Pages1
User actions