News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Fusible Link Replacement???

Started by Silver68RT, May 25, 2006, 10:10:20 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Silver68RT

May 25, 2006, 10:10:20 PM
OK, how do you replace a fusible link?  I've got a '68 Charger R/T, and the fusible link is broken off at the connector.  I can't figure out how to get the pin out of the connector.  I've seen the fusible links listed in the Year One catalog, so I assume it must be removable, but I can't get it to budge.  Do I have to buy a whole engine harness to fix this?

Thanks,

Doug
Silver68RT

Plumcrazy

#1
May 26, 2006, 05:49:11 AM
You have to disconnect the engine connector from the bulkhead and release the terminal from that side.  Buy a replacemant fusible link and when you look at the spade terminal end you'll see what keeps it in the connector.

It's not a midlife crisis, it's my second adolescence.

Nacho-RT74

#2
May 26, 2006, 10:24:55 AM
Bend/press to center the thinnest side of male spade terminal on bulkhead plug to be able to release from plug, and then install the new one just inserting it
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Silver68RT

#3
May 26, 2006, 06:37:12 PM
Thanks,

It's out now.  It's in several pieces, but it's out.  Hopefully I didn't mess up the connector.  Year One was out of stock, so it'll be a while before the new one shows up.

Doug
Silver68RT
Print
Go Up Pages1
User actions