Ignition and starter upgrades to my 1968 Charger

[TTSaleen]

Some of the first mods I have completed on my Charger in the first 30 days were -

• Removed points/condensor and installed electronic ignition upgrade - Pertronix ignitor III and a new vacuum advance.
  You'll see the problems I encountered during this install and how I got around them.
  Also new cap/rotor, plugs, wires, air filter, cleaned PCV valve, and replaced some cracked vacuum hoses.
  Next was replaced that large starter with a mini Mopar starter.

Items -
Voltage regulator - Autozone - Duralast VR706
Pertronix Ignitor III electronic ignition upgrade - PX71381A
Pertronix Coil flame thrower II
Wells Distributor Cap - CR902G
Wells Rotor Button - CR903G
Standard OEM Plus spark plug wires - 9885
NGK spark plugs - 7734 (BPR5ES)
Mopar mini starter - 440-415
LEDlight.com for the LED dash lights
New battery cables and starter cable

I put together a couple of quick videos on those mods and include the part numbers here - (as an added bonus I include the LED bulb upgrade for the dash cluster as well)

https://youtu.be/XtI7eG8XCQs

https://youtu.be/qLRvtg3VS28

Ryan