Rear window trim clips...photo request

[AKcharger]

Anyone have a good picture or better yet measurements  on these clips? I think I drilled the bottom side one too high

[tan top]

 bottom of the clips touch the bottom of the channel  like on your top clip in the picture

have a look here

  http://www.dodgecharger.com/forum/index.php/topic,31064.0.html

[AKcharger]

Hey I've seen that picture before!

OK take away is they touch bottom of channel

[tan top]

Hey I've seen that picture before!

OK take away is they touch bottom of channel

yes if the glass channel is with in factory OEM specks ,
the revel moulding clips are  original OEM/ repop  type,
the butyl tape to stick the back glass on is stock factory thickness

there is a thread on here somewhere that gives all this info in depth

[AKcharger]

Rodger. I had to do the channel repair common of all cars and "lost" the holes

Thanks!

[hudak69rt]

bottom of the clips touch the bottom of the channel  like on your top clip in the picture

have a look here
Can someone explain there measurements where they're coming off from?
  http://www.dodgecharger.com/forum/index.php/topic,31064.0.html

bottom of the clips touch the bottom of the channel  like on your top clip in the picture

have a look here

  http://www.dodgecharger.com/forum/index.php/topic,31064.0.html