68 Charger Auto Console Bracket Positioning

[MOsman82]

Finally getting back on the Charger after a 6 year hiatus.....

Car was missing the Auto Console and Mounting Brackets when I bought it.

Am looking at the AMD brackets, but am unsure how to position them on the floor before welding them on.
   
How am I best positioning thhese brackets?

- Do I use the console itself?
- Or are there templates/measurements available to position the brackest.

Thanks in advance for your help, as always.

Mike

[Charger-Bodie]

Install seats, attach brackets to the console shell, tack weld them, then check the fittment of the top plates , shifter and console lid for fitment. If all is good weld for real and done.

[Domino]

Adding on to old thread here:
I made this mounting jig from my '70 auto to put in 69 4-speed.  These were chopped out for some reason.
Made the 3 brackets from 1.5"x1/8" flat stock.  Can buy these from brewer's.

I'm done with jig if someone wants it...BM me about it.