Taking off the trim and vinyl top

[BrugeeRT]

Yesterday I got the moulding off the rear window pretty easily, but what is the trick getting off the moulding around the vinyl top?  It is so tight, I cant hardley get the tool behind it.  The previous owner put a new top on but judging from the rest of the car, I dont trust what's behind it and I plan on blasting the whole car.  Has anybody ever taken a vinyl top off without destroying it or stretching it out? I'm guessing this is near impossible but thought I'd ask.

[cdr]

look under in the trunk, some are nuts

[Nacho-RT74]

3 speed nuts aliong the trim. Becarefull, nuts could be stuck and you can crack the studs ( don't ask how I know it LOL, not on a 2nd gen but similar on a 3rd gen piece ), is potmetal

[Nacho-RT74]

aaaand... I don't think a Vinyl top could be reusable

[cdr]

3 speed nuts aliong the trim. Becarefull, nuts could be stuck and you can crack the studs ( don't ask how I know it LOL, not on a 2nd gen but similar on a 3rd gen piece ), is potmetal

& the outer one has 1 or 2 nuts & the rest are pushin clips

[Nacho-RT74]

I guess using this spring loaded fasteners: