Gear Drive Question...

[Lighthorseman]

Firstly, my apologies for cross-posting on other forums, but I'm hoping that casting a wide net will find someone who can answer.

I picked up a gear drive for the 440 in my Road Runner, but when I removed the timing cover, I found that the cam that is installed is a single bolt type with a "key" for alignment. The gear drive appears to require three bolts. Is there some way to install this, or am I completely hooped?

Thanks in advance for any help!

[John_Kunkel]

See my reply on the other forum, can't be done.

[Lighthorseman]

Yep - thanks!  Looks like this gear drive thing is a non-starter, at least for the time being.  I was really only after the cool gear drive sound anyway.  I can live without it.