Correct Mounting Bolts for Chin Spoiler and Lower Nose Tray for Superbird?

[RSI700VIPER]

Can someone tell me what is the OEM correct bolt size and finish for the chin spoiler and the lower filler tray that goes from the rad support to nose cone?  Pretty sure they were not body color.
Thanks.

[nascarxx29]

Spoiler bolts a I recall had built on washer and threaded into a nut sert in nose.If you scrape spoiler those nut serts rip out

[nascarxx29]

The latchtray
bolts similar as described above but I recall the washer spins not molded in

[nascarxx29]

Dave Patik sells them or has pictures of originals

[RSI700VIPER]

Are they black phosphate?  I can see the round depression left in the sheet metal so I have a good measurement for the washer.  Does Dave Patik have a website?     

[nascarxx29]

Try www.performance car graphics

[nascarxx29]

www.performancecargraphics.com

[nascarxx29]

http://www.performancecargraphics.com/Winged_Car_Stuff/Hardware.htm

[Sgt Superbird]

I believe the latch tray bolts with captive washers are the same as the lower closure panel bolts. Most of mine have the anchor heads and should be back phosphate, to the best of my recollection. I agree, those nut serts are kind of fragile, however, I've never driven the two birds that I've had/have to get into that predicament!

[RealWing]

These were on my Superbird. Cant guarantee they are original.

Manufactured by Eaton Corporation- Engineered Fastener Division, Cleveland Ohio

[RealWing]

My latch tray bolts  were manufactured by the Anchor Bolt Company, Division of Buell Industries Inc., Waterbury, CT.

They are ¼'-20 with a 7/16" hex head and a 5/8" conical washer and were black phosphate coated.

[RSI700VIPER]

Good info all.  I'll order a set from performance car graphics.

[gtx6970]

https://www.amkproducts.com/bulk-fasteners-listing/?codeforlookup=7314