New Driver Door Recommendation

[Calif240]

My driver door doesn't align properly... my 1969 Charger was hit a few years back and the door work done to it through insurance was junk.

Long story short, I'm looking to possibly buy a new driver door and replace my door. My question is A) should I look to find a good original door from the factory B) order a new AMD (not sure how good the new tooling is). Not sure how much "massaging" I'd need to do to either to get them to really align nicely. If I'm going to do it, I'm going to take the time and make the gaps and alignment really nice. My hinges are new and the quarter panel wasn't hit, just fender and door. I know i may have an issue with the A-frame after the accident, but this looks like mostly door issues...

Any advice on ensuring I can get a door that really lines up nicely? Anyone trust the AMD tooling as much as the factory doors?

Thanks,
Terry

[Ryan]

allays use factory panels when possible. 

Doors for whatever reason aren't too hard to find compared to fenders and such.

I have heard that the scallops on the AMD doors are way to sharp.

[5wndwcpe]

always use factory panels when possible.

This ^^

[mAdMoPaR]

I reskinned mine. It was fairly easy. All it took was some bonding adhesive and a few spot welds. Kept original core and just cleaned it up while it  was apart.

[Calif240]

Awesome! I appreciate the info guys. Gonna look to pickup a new driver door in the next few months.

Thanks,
Terry