Would this be worth trying to sort out ?

[70 sublime]

Seen this ad listed locally

I have been keeping an eye out for a real 6 pack set up then I saw this

Mopar 440 6-Pack EFI
$1,500.00

Custom built 440 6 pack EFI. Too many projects on the go. Needs some finishing. Can be run off most aftermarket computer systems. Text for more information. Price is firm, please do not ask.

https://www.kijiji.ca/v-engines-and-engine-parts/owen-sound/mopar-440-6-pack-efi/1500112468

Wonder why the builder stopped working on it ?
Would there be any advantage using something like this over just a straight 4 barrel set up EFI ??

[John_Kunkel]

If I was in the market for something like that, I'd jump on it for the price. If nothing else, just for the novelty.

[Mopar Nut]

Not a bad price if it works, go check it out.

[70 sublime]

I talked with cdr on this
Sounds like I will need another $5000 worth of stuff to make it work 

Not really worth pursuing any farther

[tan top]

 what about this , maybe easier option if your set on  a six pack 

 

[70 sublime]

I asked the seller a question

if I have nothing now what will it take to make this work on a motor ? what electrics ?

And this is what I got back

The throttle bodies are based on the older 5.9. You can get either a engine
management system from Hotwire or a Megasquirt system that you can
customize and expand to control spark and timing as well. This is not plug
and play, you will need to invest time into research and learning.

Think I will just stick with old school original style parts for now 

[c00nhunterjoe]

If i were going to do a 6 pack efi, i would use the indy setup.

[Mike DC]

 
The seller must really need rent money. 

That looks like a lot of money & hours into a custom setup for him to just quit on it now. 

[John_Kunkel]

Hmmmm, if I took my stimulus money and added a couple hundred to it, I could have a real nice work of art for my coffee table.

Collectors pay millions for artwork that's not nearly as purty as that setup.

[70 sublime]

Hmmmm, if I took my stimulus money and added a couple hundred to it, I could have a real nice work of art for my coffee table.

Collectors pay millions for artwork that's not nearly as purty as that setup.

it is purdy 

Also remember this listing is in Canadian money so US is around $1000

[Rolling_Thunder]

Hmmmm, if I took my stimulus money and added a couple hundred to it, I could have a real nice work of art for my coffee table.

Collectors pay millions for artwork that's not nearly as purty as that setup.

it is purdy  

Also remember this listing is in Canadian money so US is around $1000

Very tempting...    wonder if he'll ship to CA...                The IAC, TPS, MAP are all there - would just need an O2, IAT, and CKP signal to get it up and running...    the red top injectors are EV1 style - based on Bosch - red tops are 30lb/hr so it's good for around 450hp...              would be pretty straight forward with a MSII or get an MSIII and run it full sequential