Steering Column Dash Closure

[john108]

1968 Dodge Charger
The attaches picture shows what I call the "Steering Column Dash Closure"
I was about to install it but couldn't find what bolt or screws would fit.
I didn't want to force anything but nothing seemed to start.
I hope you had better luck.
Thank You
John

[Nacho-RT74]

I guess it should get oval selftaping screws with phillips head, and dash frame should get J or C or U nuts ( I allways get confused about which one is each one )

[john108]

Thank you.  I didn't think about the U type nuts. 
I don't remember taking any off when I stripped the dash assembly.
But, I also don't remember if I has Breakfast.

[john108]

I got under there and the shape of the metal frame won't allow the use of U-Nuts.
So, It is a sheet metal screw or a Nut and Bolt.

[Nacho-RT74]

So, It is a sheet metal screw

Maybe that. Long time since I worked down a 74 Dart ( which uses the same kind cover ). The selftapping screw on pic actually works for sheetmetal when hole is already done.

the cluster of my 74 Charger gets U nuts on dash frame thought

[john108]

I used #10 Sheet metal screws.