71 Superbee . Is this panel available new ?

[Simonic]

I've got some corrosion on the panel that is between the rear screen and the trunk lid .
I'm wondering about replacing the whole panel but can't see anyone selling them.
Is it available please ,and if so from who ?
Thank you gentlemen

[Montclaire]

The 71-74 Plymouth B-body piece will work, it just has two extra notches that weren't used on the Dodges. 

[Nacho-RT74]

Notches needs to be flattened out to make it work. Aside that is a perfect match. BTDT.

[Simonic]

Thank you gentlemen.
Your advice is appreciated as always

[Nacho-RT74]

Removing the old one and the notch on the new one ( Plymouth )

[Nacho-RT74]

Sorry the pic indexing, loaded from my phone

The final result. On one of the pics you can see the notch flatened out. It was cut and patched, because is the only way to fit the panel flat since it meets with hinge brackets. I replaced also the trunk gutters

[Simonic]

Thank You so much Nacho for all these pics and info.
I think that this is the part i will need


http://www.autometaldirect.com/amd-deck-filler-panel-71-74-plymouth-b-body-p-1037.html

[Nacho-RT74]

Yeap that's it! But you can get it cheaper from some resellers around

[Simonic]

Yeap that's it! But you can get it cheaper from some resellers around

I'll likely be buying from Summit.
I need a sure-grip and some gears so i'll order them all together. I don't know how you find it but the service from Summit is good and you know how much the shipping is when you place the order...