License plate and reverse light wire tabs; 3-finger

[hemi68charger]

Operation license plate and reverse light wire tabs; 3-finger tabs
Anyone have a source of new wire tabs that attach to the rear valance on a 68-70 Charger that secure the wires for the license plate and reverse lights? Can't use the originals now, so need to get three..
Thanks.

[tan top]

i'm sure ive seen these clip things for sale somewhere , but where I cant remember !


year one sell something similar/ same  but with a screw hole could always plug weld them on & grind the weld flat & finish as necessary , bit expensive though just of one ( although  it is   yearone   ) ,   maybe cheaper from someone else  



https://www.yearone.com/Product/chrysler-b-body/fr5

[matrout76]

i might need some of these myself soon when i replace my rear valance.

I can have a bunch laser cut out of the correct thickness steel sheet for WAY LESS than $14 each...probably closer to $1-2 each. 

Would it be worth making a bunch?  How many people need them?

[A383Wing]

i'm sure ive seen these clip things for sale somewhere , but where I cant remember !


year one sell something similar/ same  but with a screw hole could always plug weld them on & grind the weld flat & finish as necessary , bit expensive though just of one ( although  it is   yearone   ) ,   maybe cheaper from someone else  

I agree with tan top here.....I have seen new ones somewhere also, the ones I remember have the small hole for a sheet metal screw

Bryan

[hemi68charger]

Hey Guys.. I found that Jaime at MegapartsUSA had them.. Ran out of the 2-fold, but had them. Buddy removed the originals along with the taillamp panel tabs..