harness hold-down tabs

[hemi68charger]

Hey gang..
Anyone know who supplies/sells the wiring harness tabs used in the trunk and valve covers? I need the double fold tabs for the trunk floor and single for the inner wheel well

[hemi68charger]

found them.. Good ole Jaime..

https://www.megapartsusa.com/proddetail.asp?prod=146%2DWHB

https://www.megapartsusa.com/proddetail.asp?prod=199%2DVCB

[kent]

Wonder how they hold up when you weld them in? The rubber coating that is.

[birdsandbees]

Wrap a wet rag around the coated part.

[kent]

Thanks Wayne. Always wondered how they welded those in with out melting.

[birdsandbees]

is, were they actually coated in "dip mold" in the first place. My Bee and Bird trunk tabs TTBOMK were bare!

[hemi68charger]

Wonder how they hold up when you weld them in? The rubber coating that is.

They may use adhesive on them...... But if they do spot weld them, the process probably happens so fast there isn't enough time for large heat transfer.. I'll have to take a look at my original floor pan section to see how they to it..  Not sure how AMD does it. Unfortunately, they put the incorrect single-fold tabs on the quarter extensions....

[kent]

is, were they actually coated in "dip mold" in the first place. My Bee and Bird trunk tabs TTBOMK were bare!

I thought they were. I'll check it out next time I'm at the shop. Might be able to tell from my pictures.