K frame mount locations

[lisiecki1]

Anyone have a K frame diagram that shows the difference in dimensions on the motor mount cradles for a small block vs. a big block?

I know conversion mounts are available, but I'm considering just relocating the brackets since the Kframe is out of the car.

[Alaskan_TA]

You need to be more specific.

For some applications, the small block & big block K-frames are the same.

[67tbird]

Not a full diagram, but helpful. http://engine-swaps.com/Pages/ProductsType/K-Frames.html

[Nacho-RT74]

You need to be more specific.

For some applications, the small block & big block K-frames are the same.

Actually I'd say for MOST of applications... except 73 and lates B bodies ( and all Hemis )

[lisiecki1]

You need to be more specific.

For some applications, the small block & big block K-frames are the same.

'73 B-body

[Nacho-RT74]

the difference is not on K member itself but the towers mounts location and size...

( and I have the pic showing that, somewhere but couldn't find it now )

[lisiecki1]

the difference is not on K member itself but the towers mounts location and size...

( and I have the pic showing that, somewhere but couldn't find it now )

Thanks, Nacho.  I hope you find it.

I'm probably just going with Schumaker mounts since this information is so difficult to find.

[Nacho-RT74]

Yea well, I have the pics, and I have posted many times, BUT there is not measures on it. Long time ago somebody made a personal website and posted more pics measurements included but is gone now.

[Nacho-RT74]

searching for some other pic, just found the K member one

[375instroke]

BigBlockDart.com has instructions for converting a small block spool mount K-frame to big block. It uses the same mounts you will be using, so the dimensions will be the same.
https://www.bigblockdart.com/techpages/dck.shtml