News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1969 Charger dash installation

Started by RealRT, October 07, 2019, 01:26:36 PM

Previous topic - Next topic

What are these holes for on side of dash frame installation bolt clips?

?
2 (100%)
?
0 (0%)

Total Members Voted: 2

RealRT

I installed a new M&H dash wiring harness and all plugs went on switches one way except flasher wiring plug. Is it correct to have red wire on bottom? Also what are these other holes for on side of dash frame bolt clips I am pointing at?

green69rt

My car (69) does not have the hole you're point out.  Maybe a former owner was doing something, though I can't imagine what.  I'd put a dab of seam sealer on it or just leave it as is, I can't see that it would hurt anything.

RealRT

Thank's - I been wanting to PM you about your car. I live in Beaumont Texas

green69rt

Tough getting there with the I-10 bridge out.  Keep on!!