News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

windshield

Started by john108, October 05, 2019, 12:25:05 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

john108

October 05, 2019, 12:25:05 AM
1968 Dodge Charger
Does the installed A-Pillar molding and inside upper molding interfere with installing the windshield Glass?

cdr

#1
October 05, 2019, 12:31:24 AM
no
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

gtx6970

#2
October 07, 2019, 05:34:03 PM
Quote from: john108 on October 05, 2019, 12:25:05 AM
1968 Dodge Charger
Does the installed A-Pillar molding and inside upper molding interfere with installing the windshield Glass?

Not at all.
the only thing I would think about is just how sloppy the installer is for the seal primer under the rubber gasket getting it on the interior trim
Print
Go Up Pages1
User actions