News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

License plate lamp

Started by nitrousn, September 11, 2019, 01:56:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

nitrousn

September 11, 2019, 01:56:39 PM
Does any one have a picture on how they are assembled? When mounted in the bumper does the wire direct to the left or right?

green69rt

#1
September 11, 2019, 04:01:58 PM
I have a 69.  Your's a 68, right?   Wires come thru a grommeted hole in the trunk.  The hole is to the driver side of the trunk latch brace.  My pics attached of my 69.  Your's would only have one wire going thru if it's a 68...  (maybe)

Pic 1 outside, Pic 2 inside.

nitrousn

#2
September 11, 2019, 04:42:03 PM
Mine is a 69. My lamp has a shield and I wanted to see how it was assembled and when installed do the wires point left or right when its mounted to the bumper.

green69rt

#3
September 11, 2019, 10:38:34 PM
Quote from: nitrousn on September 11, 2019, 04:42:03 PM
Mine is a 69. My lamp has a shield and I wanted to see how it was assembled and when installed do the wires point left or right when its mounted to the bumper.

Looks toward the drive side.
Print
Go Up Pages1
User actions