correct spanner wrench 4 68 charger a/c compressor clutch 318 engine

[68rtnut]

can  some one help me out on buying the right one with out spending a fortune on a universal set,   THANKS TO ALL 

[Pete in NH]

Hi,

If you are working with the original RV-2 compressor no special tools are required to remove the clutch. If the compressor is still mounted on the engine with the belts on place- Power up the clutch blue wire and remove the clutch to compressor mounting bolt in the center. Then thread a 5/8-11 bolt into the clutch center hole and tighten the bolt to press the clutch off the compressor shaft. Be careful not to loose the woodruff key on the compressor shaft. tighten the bolt until the clutch just pops free of the compressor shaft and then remove power from the clutch and remove the belts. doing it this way helps keep the compressor from turning as you remove and tighten bolts.

Hope this helps.