Stopping by to Say HI again.......

[1974dodgecharger]

Just saying HI and showing off more of my stuff 

[Kern Dog]

Hemi stuff, huh?

[1974dodgecharger]

Hemi stuff, huh?

the usual....

[alfaitalia]

Better than porn!!

[cavemanno1]

I guess it says a lot about what kind of porn you watch   

[INTMD8]

I guess it says a lot about what kind of porn you watch   

I'll take engine porn over tranny porn

[Mytur Binsdirti]

I'll take engine porn over tranny porn

Same here. Let's keep that other type of porn confined to the Aero section.

[Ghoste]

It looks good all shiny and pretty like that.   

[70 sublime]

Of the three cranks in the front of the picture which one is for the Hemi ? The one on the left ??

[tan top]

 awesome ! keep the pictures updates & stuff coming as & when 

[1974dodgecharger]

Of the three cranks in the front of the picture which one is for the Hemi ? The one on the left ??

correct...I learned alot about cranks, but the one on the left is center counter weighted makes it hold it, 'together' better for higher HP vs the other two on right.  The HEMI being made out billet will handle more than the std forging of the cranks on right.... 

[1974dodgecharger]

awesome ! keep the pictures updates & stuff coming as & when 

thx you will update more as the block now is getting torque plate for the honeing to finish and then asked for chamfering on bores and oil galleys etc...

[Challenger340]

Center counter weight cranks are the SH*T  

Looks like somebody's getting pretty serious here ?
What Heads ?

[1974dodgecharger]

Center counter weight cranks are the SH*T  

Looks like somebody's getting pretty serious here ?
What Heads ?

Tim@FHO is working on them...I sent him my build lists and he is building the heads to accomodate this setup.  When I told him the HP I wanted with pump gas he laughed on the phone and said,'Thats way too simple'....I asked him to spec me out a cam also for build. 

[Kern Dog]

You looking to make the stock HP with this thing or maybe 20-30 more?   

[1974dodgecharger]

You looking to make the stock HP with this thing or maybe 20-30 more?   

lmao....

[Challenger340]

Center counter weight cranks are the SH*T  

Looks like somebody's getting pretty serious here ?
What Heads ?

Tim@FHO is working on them...I sent him my build lists and he is building the heads to accomodate this setup.  When I told him the HP I wanted with pump gas he laughed on the phone and said,'Thats way too simple'....I asked him to spec me out a cam also for build.  

You are in good hands with Tim.

The Stage V's work well... on 572 KB's we've Machined & Built here, ours have made 930 HP on the Dyno N/A using 91 Octane with just a .670" Lift Roller Cam, street driven so we wanted easy on V/Springs for the Customer.
We freshened that Engine for our Customer after 5 years on the street awhile ago... still looked like brand new inside so we just sent the Lifters for rebuild, reset the V/Springs and away he went again.

[Q5XX29]

Agree on Tim Banning/FHO being a great resource for a top-notch Hemi! I am running two of his stroker hemis now (a 572 and a 604), and always looking for an excuse to have him build me another. Keep us posted with your progress!