Distributer

[74340charger]

what is a good distributer to run on my 340. It has an Accel super coil. I'd Like to get one that I can use now and when I get new heads and intake. Also what wires work best. I have Bosch platnum plugs
Thanks!

Dallas

[71440charger]

you should use champion plugs just my opinion

[dodge freak]

Well I use the Mopar electronic dist. and a MSD 7 al spark box, had a 6a but it was 8 years old and had no rev. limiter so I went with a 7 unit and found it works even better than the 6.  The springs in the Mopar dist were too strong but MR Gasket makes light ones that work great. I am able to use both but sometime you should use only one and keep the other one stock. For the cap and rotor I use Accel. Spark plug wires I have a  set of black 8.5 by MSD, its hard sometimes to make custom size wires that are perfect so I got the pre made ones, I did take a ohm meter to them and 1 was a little high so I told Summit racing and they sent another set so I then took the lowest resistance ones between the 2 sets and sent one set back, Summitt was great they did not charge me any more for shipping and gave me $10.00 back cause I shipped one back to them.

[Chryco Psycho]

or a Mopar dist & ECU work well too , probably get a good system from a wreckers

[dodge freak]

Yeah that will work fine for the money--I just said what I have.  The mopar dist works great just got a brand new unit made in 92 for $70.00 on ebay. If you aren't using the vacuum advance you can get a pick up coil plate that is one piece that works perfect. Its for the lean burn motors.