'68 Charger tail lights

[john108]

About to install the tail lights.  The 3/16 dia. Studs protrude about 3/4 inch into the trunk.
#10-24 thread I believe. 

What does the retaining nuts look like?  Simple nut or something more complex??

[cdr]

it is a nut with built in washer , call Tom @ R/T specialties he has what you need

[green69rt]

any of these work??

http://www.megapartsusa.com/proddetail.asp?prod=114-TLF901

[john108]

Thank You
It appears that I Have a bag full of those formed nut/washers.

[cdr]

 

[gtx6970]

What ive seen on every 68-69 Charger Ive looked at while doing 2 different cars

10-24 machine thread nut, .75 Diameter washer , Yellow zinc di-chromate plated

[cdr]

What ive seen on every 68-69 Charger Ive looked at while doing 2 different cars

10-24 machine thread nut, .75 Diameter washer , Yellow zinc di-chromate plated

Yep thats whats on my car in the picture I posted 

[john108]

Thank you.
That means that the nuts I have are not right.
I will also have to search through all the plastic bags I have in many hiding places.

[john108]

I found 9 of them.  They look 50 years old.  Have to see if I can clean them some.