Positive battery cable routing with headers

[mopar0166]

So I've searched and searched but found no info. 

I need advice on replacing my positive battery cable.  I have headers which takes away stock routing and I'd rather not run them up And along valve covers.   The stock harness I got will most likely be way to short to run over to the wheel well and to battery.   

What have you guys done with this issue.   

Also.  I'll add in about coil mounts.   I'd like to move my coil from the front of my carb to the passenger wheel well but finding posts on that are limited. Etc.     thanks in advance

[mopar0166]

ill keep yall updated   im most likely just making my own , stock one I purchased is about half the length needed.  I started last night.

[Hemidog]

Do you mean from the battery to the starter?

When I mounted the mini starter, I had to flip the connection 180 degrees, so the cable is routed rearwards. The original cable is a hair short, so I wrapped it in aluminium tape.