71 Superbee Front Spoiler Fitment

[Simonic]

Hello Gentlemen.

I've recently bought a repro front spoiler from Yearone for my Superbee.
The instructions for fitment are basic to say the least.
Would any of you have any tips for measurement or even perhaps be able to show me some close shots of the fitment ?
Thank You

[71 Bee Man]

Hello Gentlemen.

I've recently bought a repro front spoiler from Yearone for my Superbee.
The instructions for fitment are basic to say the least.
Would any of you have any tips for measurement or even perhaps be able to show me some close shots of the fitment ?
Thank You

What colour Bee do you own ?

[Simonic]

FE5

[71 Bee Man]

I'm considering putting one on mine. From what I've seen they don't look too hard to install. Pretty sure they can only line up in a certain position.

[Simonic]

I'll just offer it up and see how it goes if I have to . I wondered if anybody had any definitive location instructions. The 'fitting' instructions that come with it are very vague......

[71charger_fan]

When I did mine, I took the front valance off the car and turned it upside down on the ground. Then, I moved the spoiler around until I found a "best fit" where it was evenly spaced and taped it in place while I marked where to drill the mounting holes.

[CDN72SE]

I did the same as 71charger_fan, the contour of the valance almost shows you where to place it. Back when I installed mine there were no instructions.

[Simonic]

Thank you gentlemen. That sounds like great advice. That's what i'll do.

[Simonic]

Ok. I've got the front panel off and you guys are both right. The fitment seems much more obvious now.
However this has opened up a can of worms for me .I'll start another post.......

[brigond]

I have installed the front spoiler on my 71. Here is a link to the 3rd gen forum. Mine came with paperwork it gave some tips. I posted details and pictures on how I installed the spoiler .
https://r.tapatalk.com/shareLink?url=https%3A%2F%2Fwichargerguy%2Eproboards%2Ecom%2Fthread%2F22299%2F&share_tid=22299&share_fid=106592&share_type=t

OK, THIS POST IS FROM 2017, ANYWAY HERE ARE INSTRUCTIONS WITHOUT REMOVING THE FRONT VALANCE.
FYI . .Front spoiler