1967 Power Steering Box High Pressure fitting

[69Chrgr]

Could someone please tell me what the thread or P/N is for the high pressure fitting adapter is that goes onto the steering box for the high pressure hose from the pump?

[John_Kunkel]

P/N for the pre-'69 fitting (Mopar calls it an adapter) is 1618610. It is 5/16" flare, the '69-later is 1/4" flare. The threads in the box are 1/2"-20.

[69Chrgr]

Thanks John. This thing was a PIA to find. I finally ordered one through Bouchillon Performance. Thanks again for the response.