News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I'm back !!!

Started by sardillim, February 10, 2019, 07:50:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

sardillim

February 10, 2019, 07:50:39 PM
I'm Back !!!

It's been quite a while mostly due adding a cnc plasma table to my arsenal of fab equipment.  With this machine I was able to design and cut the rear frame rails.  One of the many advantages to this machine is that when you need more than one on the same part they all come out the same.  Today I made the inner sleeves that will and strength at the point were the new rail will meet the viper rear clip.  Welding up the rails and installing them should happen next weekend

sardillim

#1
February 10, 2019, 08:00:53 PM
pics

sardillim

#2
February 10, 2019, 08:01:43 PM
more pics

JB400

#3
February 10, 2019, 09:51:59 PM
Welcome back :cheers:

Mopar Nut

#4
February 10, 2019, 11:17:24 PM
:wave: Welcome back!
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."
Print
Go Up Pages1
User actions