News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

73/74 Top of fender turning signal lights

Started by Nacho-RT74, November 16, 2018, 05:48:28 AM

Previous topic - Next topic

Nacho-RT74

Even I have had these installed long time ago I'm pretty sure they were placed incorrectly, so, need to know what's the correct location for these on 73/74. I'm pretty sure the bulb must match with the side marker bulb ( mines were around an inch and a half off ), but can't tell how far from inside edge of fender ( hood gap ) must be.

( dunno why I think this, but maybe I asked this in the past? LOL )

Read more: http://wichargerguy.proboards.com/thread/22107/top-fender-turn-signals#ixzz5X0thQU3b
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Gold Rush

I have a whole series of photos from this restoration and I believe you are correct about front to back positioning.  Here is a front view to hopefully give you a good idea of position from the body line.

24 years USAF, 25 years consumer electronics repair technician.  Now I ride a Honda Goldwing trike and wrench my latest project.  Children and Grandchildren are gown so I have to find other places to spend my time and money!

Nacho-RT74

Thanks! I'd like to get more exact measurements. Working on correct this on my fenders. The holes I opened initiallywhen I added this feature on my car are already sealed.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

ODZKing

I have pics of 2 OEM fenders before they went to the recycler. Too many to post, where to send them?
Bob

Nacho-RT74

Just need the measurements , side to side and confirm the location matching with sidemarker center ( bulb with  bulb )
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

ODZKing

Quote from: Nacho-RT74 on November 16, 2018, 06:19:46 PM
Just need the measurements , side to side and confirm the location matching with sidemarker center ( bulb with  bulb )
pics sent

Gold Rush

Quote from: Nacho-RT74 on November 16, 2018, 06:19:46 PM
Just need the measurements , side to side and confirm the location matching with sidemarker center ( bulb with  bulb )

Bob sent me the photos so I thought I'd post three of them for you NACHO.  Should be able to get the indicators set with these...





24 years USAF, 25 years consumer electronics repair technician.  Now I ride a Honda Goldwing trike and wrench my latest project.  Children and Grandchildren are gown so I have to find other places to spend my time and money!

Nacho-RT74

Nice fenders LOL! Thanks!

So, is not the turning signal bulb which is aligned with sidemarker bulb, but the attaching screw!
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html