News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Cost to rebuild heads on 68 383 HP

Started by triple_green, September 27, 2018, 12:44:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

triple_green

September 27, 2018, 12:44:11 PM
What should it cost to have the heads rebuilt on my 68 383 HP motor?

Thx!
68 Charger 383 HP grandma car (the orignal 3X)

cdr

#1
September 27, 2018, 12:51:53 PM
To be done correct down here, 1500.00, Guides, Valves, Hard exhaust seats,good valve job springs, ECT. if you want stock looking get some Stealths
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

tcs69rt

#2
October 03, 2018, 06:55:48 PM
I paid $850 for a pair of 69 HP heads at Rocky Mountain Machine in Colorado Springs but that was 5 years ago. Good Luck. Phone, (719) 591-7915 ยท Address. 3521 E St Vrain St; Colorado Springs, Colorado 80909
"Life ain't easy when you rode the short bus."
Print
Go Up Pages1
User actions