What do I need to do to install a tac in a non-tac car

[AKcharger]

Hi guys so what will I need to add a tac? I was thinking about this one. Car is converted to electronic ignition.

Thanks in advance

[68pplcharger]

Mechanically nothing... The tac will bolt right in (sands removing the blank plate), Electrically you will need to run some wires. I don't know what you car harness has currently. You will need to run a signal wire from the ignition to the tac signal input. If you don't have 12v and ground from the harness you'll have to run that as well.

[AKcharger]

will the factory tac harness work??

[68pplcharger]

will the factory tac harness work??

It should but the signal wire still has to be run. When I converted Mine I bought the harness. Forgot about that one. lol thanks

[440]

I bought the Evans tach wiring harness for mine.

[AKcharger]

I bought the Evans tach wiring harness for mine.

Saw their web site, so just hooks up with no other modifications?

[440]

Fully plug and play with all the factory wire colors and connectors. From memory you have to drill a hole in the firewall for non tach equipped cars. There is a thread here somewhere that shows which dimple to drill if you want it 100%

[AKcharger]