68 caliper line to hose bracket/w year one caliper

[73-charger-383]

 - does anyone have a picture of an OEM setup for that bracket that mounts on the inside of the caliper? My buddy is restoring a 68 and it had the calipers robbed off of it when he got it.  He ordered replacements from year one, but the holes where it mount look to be 1/2" off or so (along with the mount holes on the bracket being too small).  The tab/flange where the line connects to the hose also hits, so you couldn't mount it even if the holes lined up.  - has anyone else run into this issue or have an idea what might be going on?

[73-charger-383]

pic