EFI Conversion Question...

[csx4590]

Thinking about going with the Holley Sniper fuel injection set up. I have a non magnum 440 with an aluminum intake and 4 bbl carb. Other than that it's bone stock. I am looking at the EFI set up for reliability not for a real performance gain although that will probably happen regardless. In reading about the set up, it looks like you have to have a return line of some sort. My question is: what are you guys using as a return line???

Thanks
Al

[John_Kunkel]

Page 12 and 13 of the instructions explain the return line installation:

http://documents.holley.com/techlibrary_199r11031r.pdf

[JR]

I just bought a second reproduction 3/8 fuel feed line made in stainless steel, and used that for a return.

Easy peasy.

[Derwud]

I just bought a second reproduction 3/8 fuel feed line made in stainless steel, and used that for a return.

Easy peasy.

Same here..

[csx4590]

That's what I was thinking.  Thanks for the info...

I just bought a second reproduction 3/8 fuel feed line made in stainless steel, and used that for a return.

Easy peasy.
[/quote]

[metallicareload99]

I just bought a second reproduction 3/8 fuel feed line made in stainless steel, and used that for a return.

Easy peasy.

I did something similar, I use my old stainless 3/8" feed line as a return line now. I bought a 25' roll of 3/8 and bent and flared a new feed line