"1968 Charger w/ 6.1L, 6 spd, RMS AlterKtion and 4 link"

[70B5Cuda]

This last summer (2017), I was finally able to lock up a deal on a 1968 Dodge Charger that I've been chasing for about 2.5 years. It's not a rare Charger, but it was quite solid and I just fell in love with it. This is the first picture of it that I saw:



The guy I bought it from kept the Charger on some property about 200 miles away. After about a year of talking about it I was able to schedule an in person inspection on a weekend. About a year later he had to move his cars back to Kansas so it was much easier to go see.

The previous owner didn't want to sell it outright. He was more interested in trading cars so after another 6 months I came across a car that he really wanted so we were able to work a trade. I was super happy to finally get the deal done. My intent is to keep this car simple (yeah right) and have a rough and tumble car I can enjoy but we will see if that can be accomplished since I struggle with a disorder known as "scope creep".

The early plans are for a 6.1, an A518 automatic transmission, and possible a Dana 60....since I have a Dana sitting in the corner of the shop.

[70B5Cuda]

The day I picked it up:

[70B5Cuda]

The underside is really what drew me to this car. The rear frame rails and torsion bar cross member are rock solid.

[70B5Cuda]

Even the rear window corners were pretty decent. I'm sure the lower channel under the rear window will need work, but I've seen much worse.]





Even the quarter panels are solid, considering they're 50 years old and the car has been outside for at least the past 25 years.

[70B5Cuda]

The paint on this car is a real patchwork job. It was originally red, and then was painted blue. Then someone sprayed yellow on multiple surfaces but not the whole car. The engine bay is black. The front fenders were originally metallic bronze so they've obviously been replaced. At first all the colors bothered me. It has grown on me a lot, but not enough to keep it that way. I started stripping the top coats to get it down to the original red paint at least. I'm not sure where I'm going with the color yet, but I don't want to spend a ton on body work and paint. I'll figure that out later but I'm leaning towards driving it in faded red or possibly doing a quick/cheap LL1 paint job with a painted white top. Nothing expensive...just functional.

The engine bay:

[70B5Cuda]

The floor pans were much better then I expected too. The driver's side was as solid as can be. The passenger's side had lots of little holes. A previous owner had cut a hole in the hump for a 4 speed (hung manual pedals too). That wouldn't have been bad to do but the biggest issue was that the Charger had been moved around many times with a forklift. it was forked from the side and the ends of the forks pushed the floor pans up. You can sort of see what I'm talking about from these pictures:

[70B5Cuda]

With the passenger side having lots of little holes and with the forklift damage, I just decided to replace all the cabin floor pans. I plan to use the one piece AMD forward pan and the two smaller rear AMD pans. A couple Saturdays ago I got the wild hair to dig in so I got the chisel out and fired up the compressor. This picture shows how solid the driver's side pans were. I didn't find one perforation on that side.



Once the big pieces were cut out, I've been slowly but surely grinding down all the spot welds.

[70B5Cuda]

I also got on craigslist and bought this A518 transmission from a 1991 Dodge ram. I looked for a 1990-1991 A518, because they did not have lockout and the 727 converters can be used with the A518. The forward half of the case is identical to a 727, which was the 3 speed automatic. However, the A518 has a .69 overdrive ratio. I paid all of $100 for the core A518.



I went after it with solvent and a couple wire brushes. it's not quite done in this picture, but you get the idea...

[70B5Cuda]

I ordered up a rebuild kit from Transtar for $215 and took the transmission over to a buddy, who is really good with the 727. He pulled it all apart and the transmission was remarkably clean. The fluid was bright red, free of any debris, and smelled good. In fact, none of the parts had been cleaned or even wiped down when these 2 pictures were taken. The clutches were not discolored at all. I also called A&A Transmission and I ordered a manual valve body.

[Lennard]

Cool project!  Keep us updated. 

[VegasCharger]

Nice score. 

[Baldwinvette77]

Dude, awesome project 

[Q5XX29]

Nice work so far! This will be a fun one to follow. Always cool to see one being brought back from that state...

[BDF]

Enjoy your project! I'll be watching.

[Charger-Bodie]

love these kinds of builds!!

[RCCDrew]

Subscribed!

[TPR]

Looks good!
Best of luck with it.

TPR

[Kern Dog]

Holy crap....You get a car and instantly jump right into the build, huh? I wish I had that level of drive!   
Even in the "weathered" state, that car looks cool.

[Bad B-rad]

Nice car, and great build plan.
I am a big gen 3 Hemi guy, my buddy has the program to write tunes for gen 3 hemi's if you need one down the road.
I can't wait to see how you fit the 518.
I put a 2000 5.9 V8 magnum and 46RE in an e-body(73 challenger) and besides the new tranny mount(used a 700r4 rubber mount)and cross member I only had to grind a touch on the case and a few hammer spots on the trans tunnel.

Good luck and can't wit to see your progress!!!!

[darbgnik]

That car is amazingly solid, considering the neglect it surely experienced.

[70B5Cuda]

That car is amazingly solid, considering the neglect it surely experienced.

Thanks for the comments! I too am surprised its as solid as it is. It does need a driver's side outer rocker, but the rust of the structure is better then most.

[70B5Cuda]

Holy crap....You get a car and instantly jump right into the build, huh? I wish I had that level of drive!   
Even in the "weathered" state, that car looks cool.

When I post all my progress in one day, it looks like I'm moving faster then I really am! I've owned the car for 6 months so I haven't gotten THAT much done. With 5 kids, a full time job, etc , I really only get about 2 or 3 hours a week to work on it. Removing floor pans goes surprising quick with the right tools!

[tan top]

love these kinds of builds!!

good stuff 

[70B5Cuda]

love these kinds of builds!!

good stuff 

Thanks guys!

An update on the A518 build:
A port had to be tapped, threaded, for a plug that came with the A&A manual valve body kit. You can see the plug in the middle of this picture



Clutch packs stacked and loaded...





I upgraded to the billet servo design.



All done! I picked the transmission up today

[bakerhillpins]

Looks like fun! I know little to nothing about what parts swap in/out on these cars so I am happy to know about the A518 with the OD.

What happened to the other charger that was parked in front of it?