70 Bench Seat Retractable Seat Belts Installed Front and Rear

[oldcarnut]

Installed a front and rear bench seat set of retractable seat belts.  Belts came from seat belt planet.  Since I haven't seen a bench seat setup posted I thought I'd show mine.  This was on a 70 Road Runner.  Hardest part was figuring out how to do the rear through the package tray.  The factory slots are mostly over the wheel well so a straight up bracket wasn't practical and I didn't want to bolt it to the package tray itself.  I ended up using 1 1/4" X 1/8" wall square tubing and made a cross bar to mount them.  Two extra holes drilled for lab belt through the floor support back seat so each belt had its own bolt mount plus two for the retractables front seat. Just wasn't enough clearance for the back seat to slide all the way back unless I did. The rest used existing bolt holes.

[oldcarnut]

more

[oldcarnut]

more side and extra bolt hole mounts for cross bar and rear lap belt

[XH29N0G]

Thanks for posting.  The whole thing, seatbelts, seats, and car looks nice.

[oldcarnut]

Thanks for posting.  The whole thing, seatbelts, seats, and car looks nice.

Thanks 

[303 Mopar]

This is on my list to do, thank you for posting.   

[Polygon]

Looks very nice.

[b5blue]

Great job!  I like the frame added to the trunk area. 

[Midnight_Rider]

Pretty slick! Thanks for posting this.