News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need Pictures of a 67 Coronet R/T Air Cleaner Assy with 440

Started by A383Wing, February 06, 2018, 07:35:04 PM

Previous topic - Next topic

A383Wing

Looking for pictures and snorkel measurements for the stock OE air cleaner housing assembly for 67 Coronet R/T w/440 engine

I have a dual snorkel top here, but I think it's a 69 and not correct for a 67......I did look on Nick's Garage webpages, but I can't get any measurements off of those pictures. Looking at his pictures, looks like there are indents at the front of the lid for AC clearance, also appears to be an indent at the rear also, but I would not know why. Pictures below are what is posted on his site

Can anyone help? I'm going to post this over at FBBO as well

Thanks, Bryan

BSB67

67 Charger Magnum, the red headed step child.  Same air cleaner as the R/T.


500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

A383Wing

Does yours have a small flat spot on the rear of the lid? Also, how long are the snorkels?