News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What screw fits here?

Started by green69rt, January 14, 2018, 04:24:13 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

green69rt

January 14, 2018, 04:24:13 PM
I must not have bagged stuff as much as I thought.  Can't find the screws that attach the door gasket to the vent wing assembly (pic #2).

I found two screws that have the correct thread size (pic #1).  Anybody got any info on what's correct?  The pan head screw looks like it might stick up too far.

BLK 68 R/T

#1
January 15, 2018, 08:24:24 AM
I'm only seeing pic #2. Not exactly sure which part you are referring? The wrap around door seal and where it attaches to the vent window frame? Or something else?

green69rt

#2
January 15, 2018, 08:29:55 AM
fixed

cdr

#3
January 15, 2018, 08:54:46 AM
the top hole gets the small counter sunk screw the other 2 are the other screw.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

green69rt

#4
January 15, 2018, 12:46:03 PM
Thanks Charlie, now all I have to do is find them for the other door. :eek2:
Print
Go Up Pages1
User actions