1968 dodge charger exhaust.

[Animal]

Hello all,I live in UK & need a complete exhaust from manifold to tips.I have a 1968 charger,which has been totally restored.Anyone Know where I can get an exhaust.
Thanks in advance, Animal.

[Chryco Psycho]

2 companies , Accurate exhaust , they have a good product that fits well & looks stock
or TTi they have a completely mandrel bent system , not as stock looking but it will fit like a glove & sound awesome & should give slightly more power than the Accurate system

[Silver R/T]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4632798442&sspagename=STRK%3AMEWA%3AIT

[Animal]

Thanks,have ordered from accurate.
Animal.

[694spdRT]

Good choice for a stock look. I am very happy with my system. 

[Animal]

Does it sound as per original,&did you have a problem fitting it.ie:did you have to remove the starter motor etc.
Thanks Adam

[694spdRT]

I went with the High Flow hemi replacement mufflers(ACM 7052's). The sound is just a little louder than factory. My camshaft a is a little bigger than factory too so it does not sound "stock".

If you look on the Accurate Website my car is pictured. It is the car with the red undercarriage on a lift.

http://www.accurateltd.com/H-pipeinfo.htm

I don't recall if the starter will have to be removed because I was restoring the whole car at the time. Overall the system was a snap to install. It took me about 30 minutes.

[Animal]

Thanks,Tom @ accurate says he is trial fitting it on a car,before he ships it to me.(as i live in UK)

Adam.

[Animal]

Got the exhaust,fits like a glove.Engine does sound a little to quiet to me.
Adam.

[694spdRT]

Which muffler did you use?

[Animal]

They said it was the standard hemi muffler.When I spoke to Tom,he said he would send mufflers that sounded the same as original
Adam.

[694spdRT]

You probably got the standard muffler which is "stock". The ACM 7052's I mentioned earlier are louder than the stock replacement mufflers.

I am not sure what kind of sound you want but, here is a recent topic with a sound clip another member made with that has the ACM 7052 series mufflers also.


http://www.dodgecharger.com/forum/index.php/topic,11875.0.html

[marangen]

What about Dynomax products - UltraFlo mufflers etc....

anyone knows about them?

Many thanks,

Martin