News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Daytona Fender scoops

Started by winghawg, December 24, 2017, 11:35:23 AM

Previous topic - Next topic

winghawg

Hi all does any body have the dimensions for the Daytons fender scoops.Thanks in advance

alfaitalia

No idea....but I what World is a vent that faces backwards a "scoop"....it's a vent to release pressure ( or heat if on the hood) if it doesn't face forwards to scoop the air. Same story with the 70 door "scoops"....which of course are neither scoops nor vents...just cosmetic trim! It must be a Mopar thing...like many others' Rant over...carry on!
If at first you don't succeed, skydiving is not for you !!

odcics2

Quote from: alfaitalia on December 24, 2017, 12:14:41 PM
No idea....but I what World is a vent that faces backwards a "scoop"....it's a vent to release pressure ( or heat if on the hood) if it doesn't face forwards to scoop the air. Same story with the 70 door "scoops"....which of course are neither scoops nor vents...just cosmetic trim! It must be a Mopar thing...like many others' Rant over...carry on!

Here's a great read on "scoops", also known as "exhausters". This info has been on aerowarriors.com since 2009!

http://aerowarriors.com/tsots.html

:coolgleamA: :2thumbs:
:cheers:
I've never owned anything but a MoPar. Can you say that?

DAY CLONA

Quote from: winghawg on December 24, 2017, 11:35:23 AM
Hi all does any body have the dimensions for the Daytons fender scoops.Thanks in advance



I'll assume you mean "location/positioning"?... if so they are located on the fender using the BACK EDGE of the hood as a reference point, to the LOWER REAR/BACK EDGE of the scoop, 16 inches +/- 1/4", and they are centered on the fender(s) side to side, there is a driver's and passenger's side

alfaitalia

Quote from: odcics2 on December 24, 2017, 12:23:46 PM
Quote from: alfaitalia on December 24, 2017, 12:14:41 PM
No idea....but I what World is a vent that faces backwards a "scoop"....it's a vent to release pressure ( or heat if on the hood) if it doesn't face forwards to scoop the air. Same story with the 70 door "scoops"....which of course are neither scoops nor vents...just cosmetic trim! It must be a Mopar thing...like many others' Rant over...carry on!

Here's a great read on "scoops", also known as "exhausters". This info has been on aerowarriors.com since 2009!

http://aerowarriors.com/tsots.html

:coolgleamA: :2thumbs:
:cheers:

Thanks for that..interesting read..funny in places too. Not seen it before....not being an aero car owner, it's not a site I visit much. I'm of the view (as some in that feature) that they were put there mainly for looks....I would like to see the proof of a 3% reduction in drag. I would think that any reduction in drag by reduction in under fender pressure would be offset by the exhausters sticking up into the airflow over the fenders and the air escaping from the exhausters disturbing the smooth flow of air over over the windscreen.
If at first you don't succeed, skydiving is not for you !!

odcics2

Did you see the actual Chrysler Engineering document?
That's the proof!   :yesnod:
I've never owned anything but a MoPar. Can you say that?

A383Wing


alfaitalia

I have seen that..but having worked in the car/motorcycle industry on and off for about 25 years I've seen a lot of marketing bs like that. Where are the air flow charts...how was it measured? I'm not saying it did not have an affect but writing it by hand on a piece of paper does not seem particularly convincing...lol! Not to mention there are several ways of measuring drag.....and car makers tend to pic the one that proves their point best.
If at first you don't succeed, skydiving is not for you !!

odcics2

Quote from: alfaitalia on December 24, 2017, 06:24:41 PM
I have seen that..but having worked in the car/motorcycle industry on and off for about 25 years I've seen a lot of marketing bs like that. Where are the air flow charts...how was it measured? I'm not saying it did not have an affect but writing it by hand on a piece of paper does not seem particularly convincing...lol! Not to mention there are several ways of measuring drag.....and car makers tend to pic the one that proves their point best.

Marketing BS?   You are joking, right?   That document surfaced decades after the cars were out.  I don't think 'marketing' was on their minds, just winning races.   A trip to the aerowarriors.com site will help you. See the various papers in the "Documents" section.  There are charts and graphs galore!

Check out the "E" and "F" series papers, or the SAE paper on the Daytona.  More good reading material.   :coolgleamA:
:cheers:

   
I've never owned anything but a MoPar. Can you say that?

A383Wing

Somehow I knew when he was shown documentation that he would not believe it...

rob-dirt

Who makes a nice repo Fender scoop - for a daytona that you would recommend buying  :popcrn:

alfaitalia

Quote from: odcics2 on December 24, 2017, 06:59:07 PM
Quote from: alfaitalia on December 24, 2017, 06:24:41 PM
I have seen that..but having worked in the car/motorcycle industry on and off for about 25 years I've seen a lot of marketing bs like that. Where are the air flow charts...how was it measured? I'm not saying it did not have an affect but writing it by hand on a piece of paper does not seem particularly convincing...lol! Not to mention there are several ways of measuring drag.....and car makers tend to pic the one that proves their point best.

Marketing BS?   You are joking, right?   That document surfaced decades after the cars were out.  I don't think 'marketing' was on their minds, just winning races.   A trip to the aerowarriors.com site will help you. See the various papers in the "Documents" section.  There are charts and graphs galore!

Check out the "E" and "F" series papers, or the SAE paper on the Daytona.  More good reading material.   :coolgleamA:
:cheers:

   

Fair enough....if it really helps and really works I believe it. I like evidence...and you have provided it. I have no proof that it didn't reduce drag........Funny how its not been done on other cars since though.....AFAIK. I'm just a naturally suspicious person ...especially when it comes to claims by big companies.


EXAMPLE;

Back in 1992 Honda launched the new FireBlade 900 RR motorcycle. Its had a fairing full of small holes. Honda produced air flow and track time charts and could "PROVE" that it improved airflow and more importantly increase cornering speed. The next generation lost the holes. A few years later they admitted it was a combination or a marketing ploy to sell more bikes to the gullible (I owned two of these...so there you go!) and a little physiological warfare for the tracks to worry the opposition that they had an advantage. It happens all the time......so be careful what you believe !  
If at first you don't succeed, skydiving is not for you !!

winghawg

What I need are the length width height of the Daytona scoop

C5X DAYTONA

Quote from: odcics2 on December 24, 2017, 06:59:07 PM
Quote from: alfaitalia on December 24, 2017, 06:24:41 PM
I have seen that..but having worked in the car/motorcycle industry on and off for about 25 years I've seen a lot of marketing bs like that. Where are the air flow charts...how was it measured? I'm not saying it did not have an affect but writing it by hand on a piece of paper does not seem particularly convincing...lol! Not to mention there are several ways of measuring drag.....and car makers tend to pic the one that proves their point best.

Marketing BS?   You are joking, right?   That document surfaced decades after the cars were out.  I don't think 'marketing' was on their minds, just winning races.   A trip to the aerowarriors.com site will help you. See the various papers in the "Documents" section.  There are charts and graphs galore!

Check out the "E" and "F" series papers, or the SAE paper on the Daytona.  More good reading material.   :coolgleamA:
:cheers:

   
Maybe not "marketing BS" but that note insinuating it was tested is BS.   It was never tested.   If it was the 3/8s car would of had holes in the fender at one point as it is the ONLY car they tested prior to production..    I've inspected the car and there is ZERO evidence on the underside or the top side of the fenders of any holes or hole repairs..    Even George Wallace said they were never tested..     There is NOT 1 document showing anything remote to a extractor test...  That paper was probably made up to fool NASCAR into thinking it WAS an extractor...    Like George said..   We didn't know what to call it.  I wanted room up top after seeing Pointer's first "the ugly" drawing and Pointer designed a vent.    When done it looked like an extractor so we called it an extractor...  That sure was funny to George that everyone really thought it was an extractor......   

Caution.... Low flying aircraft.

odcics2

Full size testing at Chelsea.  Not everything was tested in 3/8 scale.  1:1 is more accurate.   

Back to the original question - scoop size.  I can't answer because mine were molded in to be longer.
They are also 3/8" taller to let more air out.   
I've never owned anything but a MoPar. Can you say that?

C5X DAYTONA

Your answer is a picture "low Speed test car" parked on the proving grounds?  LOL..   No aero numbers were EVER pulled from that "low speed" test car in that configuration.  Of course 1-1 test would be more accurate but they NEVER tested a full size Daytona in a tunnel prior to production.    3/8 scale text numbers were very close so that is why ALL wind tunnel texting was done with the 3/8 car.    Can't pull any drag numbers from running a car on a track..  Come on Greg..  I know you KNOW that...     And those extractors on that car were only there because George told John to put one over the right front..    George was very clear on this...  George said "John worked feverishly on those to make sure they didn't hurt the aero..      George wanted clearance and John designed an extractor..   But as far at the 3%.   NEVER.   With that small grill,  the front of the fenders pushed out and the tire rotating up high in the fender..  Not much is going on up there.  And definitely nothing measureable..                Somebody have a template of the holes to post for the original topic?  lol
Caution.... Low flying aircraft.

odcics2

Really Sean?  You never heard of drag coast down studies?
The rear wing drag numbers were done on the 88, at the Huntsville-Madison Airport by running coast down studies.
Change the angle, make a run, measure time to coast down. Stop, change the angle, repeat test.  
Keep doing it to get all the numbers and then repeat to make sure they are right.
They did and still do, drag coast down studies on the high banked oval at Chelsea.

Heck, I drove coast down studies myself when I was at the Arizona Proving grounds high speed oval in the early 90s, on a road trip.

In any event, have a Happy New Year, buddy!   :2thumbs:

:cheers:
I've never owned anything but a MoPar. Can you say that?

NHCharger

Quote from: winghawg on December 25, 2017, 02:54:53 PM
What I need are the length width height of the Daytona scoop
If you can wait a bit I could trace mine on some construction paper and send them to you. They are specifically made for each fender so they have a unique shape. would be hard to just give you some measurements. I bought mine from Janak so they are fiberglass and needed some massaging to fit properly.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

C5X DAYTONA

Yes I know the study but this was not the case with the extractor.  As with studies like that.  All temperatures, wind, humidity etc play such a factor that results are never "exact."     They NEVER tested the extractor prior to production.   Any test results on the completed car were after the fact.   Were talking about the extractor and how/why it's there.    Not what it did if anything after the fact..     The only reason the extractor is there is Wallace wanted a little extra clearance and Pointer made an extractor.  "That was his expertise" Wallace stated....   Even if that thing gave the car 100 more HP..  That is NOT why it was installed....  Wallace said "When I saw Pointer's drawing that he showed McCurry I already knew we were close to the top of the fender and the added downforce that he could see from the drawing that it was going to make and that we could modify the fender top with the new model...  I told Pointer to make room up there."   Anyhoot..   Hope all is well with you.  Thank You for the wishes..  All going great here.  Hope all is going well with you and Happy New Years to you and your family...   BTW  I still have a ton of shots for you if you don't have of DC-93 while on a lift from under the car and all over it..     Can't wait to see your car done.   Fantastic piece of History and I can't think of anyone better to be the keeper of it..         
Caution.... Low flying aircraft.

winghawg

Thanks NHcharger that would be great I sent you a PM

Redbird

Odcics2, thank you for all the information you share. It is really insightful.

CX5, thanks for the rant reminding anyone that is close by that you are the smartest and best one here.

moparstuart

Quote from: Redbird on December 28, 2017, 01:06:07 PM
Odcics2, thank you for all the information you share. It is really insightful.

CX5, thanks for the rant reminding anyone that is close by that you are the smartest and best one here.
dont stroke seans  ego , he is already a legend in his own mind  
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

odcics2

Quote from: moparstuart on December 28, 2017, 02:50:10 PM
Quote from: Redbird on December 28, 2017, 01:06:07 PM
Odcics2, thank you for all the information you share. It is really insightful.

CX5, thanks for the rant reminding anyone that is close by that you are the smartest and best one here.
dont stroke seans  ego , he is already a legend in his own mind  

Thanks, Redbird.     :cheers:
I've never owned anything but a MoPar. Can you say that?

C5X DAYTONA

Quote from: moparstuart on December 28, 2017, 02:50:10 PM
Quote from: Redbird on December 28, 2017, 01:06:07 PM
Odcics2, thank you for all the information you share. It is really insightful.

CX5, thanks for the rant reminding anyone that is close by that you are the smartest and best one here.
dont stroke seans  ego , he is already a legend in his own mind  
Galen, you have an issue?  My conversation with Greg was not to sound like a smart ass.  I got to know George personally and I was just one here relaying his comments in a friendly (I thought) format.      I don't know where this comes from with you..   But it's not the first time..       As for you Stu... Keep it up...  I know where you live.    ;) 
Caution.... Low flying aircraft.

odcics2

Quote from: C5X DAYTONA on January 02, 2018, 01:20:16 AM
Quote from: moparstuart on December 28, 2017, 02:50:10 PM
Quote from: Redbird on December 28, 2017, 01:06:07 PM
Odcics2, thank you for all the information you share. It is really insightful.

CX5, thanks for the rant reminding anyone that is close by that you are the smartest and best one here.
dont stroke seans  ego , he is already a legend in his own mind  
Galen, you have an issue?  My conversation with Greg was not to sound like a smart ass.  I got to know George personally and I was just one here relaying his comments in a friendly (I thought) format.      I don't know where this comes from with you..   But it's not the first time..       As for you Stu... Keep it up...  I know where you live.    ;) 

p.s. Sean - I have a PILE (over a foot tall) of new info from the Woodward Garage operation. Chock full of new info, never seen before by the public!    Example - the 88 was being prepped for the 1970 Daytona 500. 
At some point in the future, it'll all be out there for wingnuts to enjoy!

Happy New Year to all!
I've never owned anything but a MoPar. Can you say that?