Help about choosing Camshaft

[ppaavvss]

hi, I have been doing some research about the correct camshaft for my 400 engine.

I would like to have good torque and HP at low RPM.

I have seen some brands for camshaft on internet:

* Edelbrock: https://www.summitracing.com/int/parts/edl-2192/overview/
* COMP Cams: https://www.summitracing.com/int/parts/cca-sk21-213-4/overview/make/dodge
* Lunati: https://www.summitracing.com/int/parts/lun-10210240lk/overview/make/dodge

Also I found in rock auto this one: http://www.rockauto.com/en/moreinfo.php?pk=212762&jsn=3

What would you recommend?

If you know other brands or websites to buy please let me know.

[timmycharger]

Some more info on your car would be helpful such as:

Rear gear ratio
stall converter stock?
headers, or stock manifolds
2bbl or 4bbl etc carb?
cylinder heads stock?
compression?

[ppaavvss]

Some more info on your car would be helpful such as:

Rear gear ratio
stall converter stock?
headers, or stock manifolds
2bbl or 4bbl etc carb?
cylinder heads stock?
compression?

It is stock at this momment, and it has a 4bbl carb.

[69wannabe]

The comp is a good cam but will be basically a smooth idle in a 400 ci. You may want to consider the high energy 268 cam, it will work with low compression and may have a slight lope at idle in gear. I had a high energy 268 in a 390 ford engine and it ran great and it was a low 8's compression engine. It had a slight lope and had great low end/mid range torque and power.....

[BSB67]

The Comp and Lunati cams are essentially identical.  I would go with either of those two from your list