Parking brake cable routing

[MartinTheHuman]

On my '69 I was looking in the old mechanics manual for routing of the parking brake cable but it's hazy and vague, and I was dumb enough to pull the old cable off last year when I took the rear end apart to put the new Wilwood kit on without snapping a reference photo...but exactly how is it routed? I see a clamp point that's basically behind the back seat under the car, is that correct? I also can't remember where the union happened for the cabling to merge to the one cable.

[MartinTheHuman]

Forgot to mention, replacing the stock drums for Wilwood's kit.

[birdsandbees]

 

[MartinTheHuman]

Thanks a ton! Was about to spot weld a bracket to the axle housing on the driver side, the tab on the body panel was missing but the bolt was there, just drilled a fabricated hook and screwed it in. The line coming out of the passenger side doesn't come straight out, Wilwood routes it out forward so the line has to make an S shape. Yours flexes usually, right?

[birdsandbees]

Both sides go forward first and passenger side then S's back to the retainer clip on the axle housing.. I'll look for another picture.

[birdsandbees]

 

[MartinTheHuman]

Appreciate it, got it all installed. On to the next problem, rear wheels have some pretty excessive runout after putting the Wilwood kit on. Always something, wouldn't be fun otherwise!