cad or gold paint on wiper motor

[73chargers4404]

does anyone know if they make i dont know if they make a can engine paint that would look like the factory paint.

[mopar_madman]

I used plasti cote gold laquer, came out nice.

[Drop Top]

The Eastwood Catalog sells any color you need for a restoration in rattle can. Looks really close also. Just dosen't last as long as real cadium plating. But alot cheaper.

[73chargers4404]

Hay madman ,is that plasti coat come in can ,and do you know who makes it and where you can buy it

[mopar_madman]

yeah its a spray can, I think i got mine at pep boys, plasti -cote and dupli- color both sell in most stores and they have web sites that list all their products.

[73chargers4404]

did you use a primer first it looks good

[mopar_madman]

don't think I did, I just sanded with 220 and cleaned the surface, sprayed a couple light coats then masked the gold area (wrapped a piece of paper around the cylinder and taped the paper so the tape didn't touch the paint) and sprayed the silver area then sprayed the center with a cast grey color. All done with spray cans.