Dual Snorkel Air Cleaner Hose Sizing

[69bronzeT5]

Hey all-
Restoring the dual snorkel air cleaner for my 1971 Charger R/T. Curious what sizes the two different hoses are on the air cleaner? The one I'm restoring didn't come with the original hoses so I have nothing to compare to. Want to make sure I'm getting the proper ones. I was told by a good friend 3/16s for the small vacuum ones and 9/16ths for the air cleaner to breather cap but having a hard time trying to find those sizes.

[ODZKing]

Do you mean under, the small hose or the one to the breather? Or the one to the manifold stove?

[69bronzeT5]

Do you mean under, the small hose or the one to the breather? Or the one to the manifold stove?

The small ones that can from the vacuum pots to the underside of the air cleaner and then the one that goes to the breather.

[birdsandbees]

Breather hose is 11/32nds.

[ODZKing]

Vacuum hose is pretty standard on all the cars. It is ribbed if you want original but it will be more than just running into NAPA and finding a piece of hose. Not sure of size exactly.
http://www.megapartsusa.com/proddetail.asp?prod=102-VH7

[69bronzeT5]

Thanks guys. I'm doing an article for the magazine I write for so looking for correct as possible. YearOne supplies us with a lot of stuff so going to reach out to them. Is this hose correct for the vacuum hose? ODZKing mentioned ribbed to be original.

https://www.yearone.com/Product/chrysler-b-body/bh157#prettyPhoto



Also, what would be more correct for the breather hose? My car was built in summer 1970 so the date code is correct in the first one.

https://www.yearone.com/Product/chrysler-b-body/bh0970#prettyPhoto
https://www.yearone.com/Product/chrysler-b-body/bh671#prettyPhoto