71 Manifold Question

[Simonic]

I'd like at some point to put cast manifold on my 71 440 Superbee.
Does anyone do a new repro manifold for 1971 cars?
Will the repro 68/69 hp manifolds fit and if not why not?
My car has power brakes and power steering

Thank You Gentlemen

[BLK 68 R/T]

They are not reproduced. 68/69 style will fit, only difference is the left side manifold has a different exhaust flange orientation and no provisions for the heat stove to attach. Right side is the same except for the heat control valve, it is a different style in than 70-71.

[Simonic]

Thank You for your response.
So bearing in mind what you have said. If I bought some of the 68/69 repro manifolds,could I then buy exhaust,say TTI and it would fit?
Looking at the TTI catalog they quote the same front pipe from 62-79.
http://ttiexhaust.com/MoparClassics-Exhaust/ComponentParts.htm

[BLK 68 R/T]

When you order from TTI they will want the manifold casting #s so they can send you the correct front pipes.

[Simonic]

Fantastic.Thank You

[Wingnut426]

Its the RIGHT SIDE MANIFOLD  that has the flange in a different angle NOT the left! 

[Simonic]

Thank You Sir

[RJS]

I would just buy exhaust manifolds off of ebay or a site like this etc...
Ron

[Simonic]

I would just buy exhaust manifolds off of ebay or a site like this etc...
Ron

Thank You Ron.
I'll have a look and see what I can find. Not everyone in the States is willing to ship to the uk,especially if the items are heavy and require careful packaging

[RJS]

Your right I forgot your out of the country. Yep a big box store like Year One is unfortunately your best bet then.
But using the current repro. since they are made for different year body do all your homework before pulling the trigger.
Are you removing headers from your car???  If so that dual quad set-up may not be too happy.
Ron

[Simonic]

I never thought about the effect it would have on the dual quad. Thanks for the tip.