1969 Dodge Daytona lower Valance

[rob-dirt]

Who are all the vendors for a 69 Daytona lower Valance in Steel and has anybody got one who would you recommend buying one from thanks would also consider a original one if available

[nascarxx29]

maybe rick fairless

[odcics2]

http://www.forbbodiesonly.com/moparforum/threads/superbird-parts.29727/

[nascarxx29]

http://ricksparts.net/2017/08/22/superbird-wing/

[rob-dirt]

http://ricksparts.net/2017/08/22/superbird-wing/

.                                                                                                                                                                                                                                                Thanks  checked with Rick he dose not offer lower Valance for a Daytona he does offer the pivot brackets and the latch tray which I also need does not offer  headlight doors and I need two pair of them also Gus's their is nobody makeing Daytona parts in steel anymore guess Superbird stuff is more popular

[Charger-Bodie]

Dayclona Mike Goyette.

[moparstuart]

http://ricksparts.net/2017/08/22/superbird-wing/

.                                                                                                                                                                                                                                                Thanks  checked with Rick he dose not offer lower Valance for a Daytona he does offer the pivot brackets and the latch tray which I also need does not offer  headlight doors and I need two pair of them also Gus's their is nobody makeing Daytona parts in steel anymore guess Superbird stuff is more popular

i have an Erik Nelsen  one its close but not perfect  , he still makes them 

[rob-dirt]

Dayclona Mike Goyette.

i have tryed to contact him several times No Luck  mabey he not doing stuff anymore  ?  ? 

[moparstuart]

Dayclona Mike Goyette.

i have tryed to contact him several times No Luck  mabey he not doing stuff anymore  ?  ?  

just hard to get a hold of he's on here just about every day

[rob-dirt]

http://ricksparts.net/2017/08/22/superbird-wing/

.                                                                                                                                                                                                                                                Thanks  checked with Rick he dose not offer lower Valance for a Daytona he does offer the pivot brackets and the latch tray which I also need does not offer  headlight doors and I need two pair of them also Gus's their is nobody makeing Daytona parts in steel anymore guess Superbird stuff is more popular

i have an Erik Nelsen  one its close but not perfect  , he still makes them 

thanks stu 3000.00 later stuff on the way found somebody willing to take my money LOL 

[held1823]

can you share what all the 3k got you? i'm about to take that plunge, too

[rob-dirt]

can you share what all the 3k got you? i'm about to take that plunge, too

shure no problem  lower valance was 1295 .00 wing washers 495.00 latch tray 425.00  3 pivot brackets i needed a single ( 3 ) was 695.00 pluss 150.00 shipping he was the only person i could find to make one in steel -seams like a really nice guy turn around time 3 week,s will let you know when it gets here

[moparstuart]

can you share what all the 3k got you? i'm about to take that plunge, too

shure no problem  lower valance was 1295 .00 wing washers 495.00 latch tray 425.00  3 pivot brackets i needed a single ( 3 ) was 695.00 pluss 150.00 shipping he was the only person i could find to make one in steel -seams like a really nice guy turn around time 3 week,s will let you know when it gets here

wow i bought my valance 2nd hand for 600 never been mounted  i think i did ok 

[Daytona R/T SE]

can you share what all the 3k got you? i'm about to take that plunge, too

shure no problem  lower valance was 1295 .00 wing washers 495.00 latch tray 425.00  3 pivot brackets i needed a single ( 3 ) was 695.00 pluss 150.00 shipping he was the only person i could find to make one in steel -seams like a really nice guy turn around time 3 week,s will let you know when it gets here

Who did you order from? 

[held1823]

where do i send paypal to you for that valance, stu?

[moparstuart]

where do i send paypal to you for that valance, stu?

[rob-dirt]

can you share what all the 3k got you? i'm about to take that plunge, too

shure no problem  lower valance was 1295 .00 wing washers 495.00 latch tray 425.00  3 pivot brackets i needed a single ( 3 ) was 695.00 pluss 150.00 shipping he was the only person i could find to make one in steel -seams like a really nice guy turn around time 3 week,s will let you know when it gets here

wow i bought my valance 2nd hand for 600 never been mounted  i think i did ok 

now you can double your money  Stu 

[moparstuart]

can you share what all the 3k got you? i'm about to take that plunge, too

shure no problem  lower valance was 1295 .00 wing washers 495.00 latch tray 425.00  3 pivot brackets i needed a single ( 3 ) was 695.00 pluss 150.00 shipping he was the only person i could find to make one in steel -seams like a really nice guy turn around time 3 week,s will let you know when it gets here

wow i bought my valance 2nd hand for 600 never been mounted  i think i did ok  

now you can double your money  Stu  

no i would rather put all my front end parts i have on a car ,  Ernie could be nice and donate the car to put them on