Anyone have a pic of the rods inside the doors??

[green69rt]

Trying to get the door locks installed and for some reason I didn't take any pictures of the rod arrangement for the inside handle and the door lock push button at top of door.   The FSM is not much help,  anyone got some pics??  Pic shows where I am now.

Second question,  is there anyplace to get this sleeving??  Second pic is what I'm talking about.

Third question,  this plastic thing goes in the door somewhere, anyone have a clue??

[BLK 68 R/T]

Should help some.
http://www.dodgecharger.com/forum/index.php/topic,95015.msg1087169.html#msg1087169

[green69rt]

Should help some.
http://www.dodgecharger.com/forum/index.php/topic,95015.msg1087169.html#msg1087169

It did, I think that thread is for a 68 but it gave me some ideas.  More later, dinner time!

[mridolfo]

look here for the sleeving.

http://www.dynamicrenovation.net/viewitem.php?productid=18

[green69rt]

look here for the sleeving.

http://www.dynamicrenovation.net/viewitem.php?productid=18

Darn, should have asked you guys before starting work!

[mike337]

Where does that white piece of plastic with the 90 degree bend go in the door?

Mike

[green69rt]

Where does that white piece of plastic with the 90 degree bend go in the door?

Mike

Goes behind the door lock handle.  I think it's a splash shield to keep water awau from the backof the handle.  You have to put it in before mounting the handle Mechanism.