Took over someone's project..'70 charger. Need help

[70sharger]

Hi guys,

So I bought someone's abandoned project few months back and now I'm finally starting to work on it.

It's a 1970 charger 500.

**Will try uploading pictures**

The new floor needs to be installed, both front & rear frame rails, radiator support, inner fenders with the shock brace(?). Basically the front is off.

--Now I need some measurement please if someone can help me I'd really appreciate it.

2nd pic shows from under the car..I need to know what's the measurement from the floor brace to the torsion bar frame.

Also if some one can guide me on what's the best way or step of putting back the frame rails/inner fender/shock brace/radiator support.

Any other or detailed measurements/heads up would be appreciated

Thank u

[Montclaire]

From another thread

http://www.dodgecharger.com/forum/index.php?action=dlattach;topic=129518.0;attach=277098

[70 sublime]

Sounds like a project alright

Where are you located ?
Might be nice to find another Charger close by that you could look at